Husqvarna TE 630 2011 I.E. Manual page 91

ADJUSTING THE SHOCK ABSORBER
The rear shock absorber is calibrated for running with the
rider plus a small bag only. It is thus recommended to
adjust the shock absorber setting (spring preload) when
riding with a passenger.
B: rear mudguard top height
C: rear wheel axle height
B
A
WARNING*: The shock absorber adjust-
ment affects both the stability and the
handling of the motorcycle. After chang-
ing the standard suspension setting,
ride with care. We advise measuring
the reference distance "A" before mak-
ing any change.
WARNING*: Never disassemble the
shock absorber, which contains com-
pressed gas. Contact your Husqvarna
Dealer for any major service.
C
ADJUSTING THE SHOCK ABSORBER SPRING PRELOAD
Proceed as follows:
1. Insert the key in latch (1) then turn clockwise to re-
lease the saddle lock; remove the saddle.
2- Disengage rear left-hand side panel (2) then slide it
toward vehicle front.
3. Clean lock ring nut (3) and adjuster ring nut (4) of the
spring (5).
2
1
EN - 33