Husqvarna TE 630 2011 I.E. Manual page 78

STOPPING THE MOTORCYCLE AND THE ENGINE
- Close the throttle (1) completely so that the engine
will help slow down the motorcycle.
- Apply both front (2) and rear (3) brakes while down-
shifting (for fast deceleration, press firmly on both
brake pedal and lever).
- When stopped, pull the clutch lever (4) and shift
gear lever (5) into the neutral position
- Turn the ignition key (6) to the OFF position (posi-
tion for removing key).
STOPPING THE MOTOR IN AN EMERGENCY
- Press the red button (7) to stop the motor; after use,
bring it back to the "out" position.
WARNING*: Independent use of the front
or rear brake may be advantageous un-
der certain conditions. Be careful when
using the front brake, especially on
slippery surfaces. Improper use of the
brakes can lead to a serious crash.
WARNING*: In the event of stuck throttle
or other malfunction which causes the en-
gine to run uncontrollably, IMMEDIATELY
depress the engine kill switch (7). Con-
trol the motorcycle by normal use of the
brakes and steering while pressing the
engine kill switch.
EN - 20
1
2
3
4
5
7
6