Husqvarna TE 630 2011 I.E. Manual page 68

COLD START
For engine cold starting, the motorcycle features a lever
(3) on the left-hand side of the handlebar. Pull the lever
to open the starting device, vice versa to close it.
3
EN - 10
DIGITAL INSTRUMENT, WARNING LIGHTS
The motorcycle is fitted with a digital instrument on
which 5 warning lights are also displayed: high beam
lights, low beam lights (with display lighting), turning
indicators, neutral gear and fuel reserve.
1- BLUE warning light "HIGH BEAM"
2- GREEN warning light "LOW BEAM"
3- GREEN warning light "TURNING INDICATORS"
4- GREEN warning light "NEUTRAL GEAR"
5- ORANGE warning light "FUEL RESERVE"
Note*:
- After starting the engine, the instrument will show
the SW version for checking for the first 2 seconds;
afterwards the instrument will show the last config-
ured function.
- When the engine is turned off, the instrument does
not show any functions.
1
2
4
5
- To select instrument functions and reset functions,
use the SCROLL button (A)
- The functions, which can be selected in order are as
follows:
1- SPEED / ODO
2- SPEED / H
3- SPEED / CLOCK
4- SPEED / TRIP 1
5- SPEED / STP 1
6- SPEED / AVS 1
7- SPEED / SPEED MAX
8- SPEED / TRIP 2
9- SPEED / TRP 2 / CLOCK
10- SPEED / RPM (engine r.p.m. numerical value)
.................
Note*:
The RPM function seen on the vertical bar indicator is
ALWAYS active.
*IMPORTANT:
Functions of the GREEN warning light (4)"NEUTRAL" in
case of FUEL INJECTION SYSTEM malfunction (contact
3
your local HUSQVARNA Dealer)
a) With the GEARBOX NOT in NEUTRAL position: the
warning light FLASHES INTERMITTENTLY.
b) With the GEARBOX in NEUTRAL position: the warning
light is initially constantly ON then it FLASHES TWICE
IN RAPID SUCCESSION then returns to being constant-
ly ON. This cycle repeats itself.
After eliminating the malfunction,the warning light (4)
A
returns to its normal operation.