Table of Contents
Advertisement
Bottom side transmitter interior
INT PPM plug-in location
One free plug-in location for connecting
an additional – internal – RF module
Plug-in location
One free plug-in location for a proportional
rotary control module,
order no. 33001.11
Plug-in locations
Six free plug-in locations for additional
switches are
standard, see page 21
These switch plug-in locations can
be used in any sequence.
Transmitter battery
Observe charging rules, see page 16
Transmitter battery plug
For charging the battery and a list of
suitable automatic chargers, see page 17
26
General operating notices - Face-side connections
Notes:
Disconnect the transmitter battery at its
connector when performing any type of work
inside the transmitter. Never allow solder points
to come into contact with objects as this can
create short circuit conditions.
All jacks and plugs not described are to be left
unconnected.
Plug-in locations (UVR, 5-pole)
eight free plug-in locations for future
rotary control installations.
Lithium battery
Lithium battery
CR2032
CR2032
(not rechargeable)
(not rechargeable)
Independent
Independent
backup for the transmitter's
backup for the transmitter's
date and time settings, see »Info display«
date and time settings, see »Info display«
menu on page 266.
menu on page 266.
Advertisement
Table of Contents
