For Your Safety By Handling The Transmitter And The Receiver; For Your Safety By Handling The Batteries - GRAUPNER mz-10 HoTT Manual

6 channel 2,4 ghz transmitter
Hide thumbs Also See for mz-10 HoTT:
Table of Contents

Advertisement

For your safety by handling the transmitter and the receiver

!
!

For your safety by handling the batteries

!
S1042_sh_V1
WARNING
Also while programming the transmitter, make sure that a motor
connected in the model cannot accidentally start. Disconnect the
fuel supply or drive battery beforehand.
CAUTION
Avoid every kind of short-circuit in all sockets of the transmitter
and of the receiver! Risk of fire! Use only the suitable connectors.
In no case the electronic component of the transmitter or of the
receiver may be changed or modified. Any interference will void
the authorization.
Note
During transport protect the model and the transmitter from dam-
ages.
CAUTION
• Protect the batteries from dust, moisture, heath and vibra-
tions. Only use in dry locations.
• Do not use any damaged battery.
• Batteries may not be heated, burned, short-circuited.
• If handled improperly, there is a danger of fire, explosion, irri-
tation and burns.
• Leaked electrolyte is caustic and should not be touched or
come into contact with your eyes. In case of emergency, rinse
with a large quantity of water and consult a Med. Doctor.
• Do not try to recharge the batteries included in the package!
Those are non-rechargeable batteries.
• Stock the batteries in dry and fresh conditions.
• Dispose of the battery in the proper disposal centers.
9 / 48

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents