Non-Delayed Channels - GRAUPNER mc-32 Programming Manual

Non-delayed channels

Channel-dependent delays to switching
Use the selection keys of the left or right touch pad to
scroll to the »Phase trim« menu option in the multi-
function menu:
Ser vo adjustment Stick mode
Control adjust Dual Rate / Expo
Channel 1 cur ve Switch display
Control switch Logical switch
Phase settings Phase assignment
Phase trim Non-delayed chan
Ser vo adjustment Stick mode
Control adjust Dual Rate / Expo
Channel 1 cur ve Switch display
Control switch Logical switch
Phase settings Phase assignment
Non-delayed chan Timers (general)
Open this menu option with a tap on the center
key of the right touch pad.
N O N D E L A Y E D C H A N N E L S
non-delayed
normal
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
On the »Phase settings« menu, you will have set the
necessary switch times for fl ight phase transitions.
In this menu, you can now deactivate the transition
delay set previously, per fl ight phase and for
individual control channels – e.g. for the motor
channel for electric models or heading-lock systems
for helicopter gyros, etc.
Switch over to the corresponding fl ight phase. This is
shown at the bottom left of the display.
Use the selection keys of the left or right touch pad
to move the " " onto the corresponding channel then
briefl y tap the center SET
The switch icon changes from "normal" to "non-delay"
and vice versa.
N O N D E L A Y E D
non-delayed
normal
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Normal
SET
key of the right touch pad.
C H A N N E L S
Detail program description - Non-delayed channels
151