Table of Contents
Advertisement
Base setup model
Model-specifi c base settings for helicopter models
Before programming specifi c parameters, there are
some basic settings to be made which effect the
currently active model memory.
Use the selection keys of the left or right touch pad to
select the »Basic settings, model« menu ...
Model select
Copy / Erase
Suppress codes
Suppress models
Base setup model
Helicopter type
Ser vo adjustment
Stick mode
Control adjust
Dual Rate / Expo
Channel 1 cur ve
Switch display
... then tap the center
SET
key of the right touch pad.
Model name
B A S I C
S E T T I N G S , M O D E L
Model name
Info
Stick mode
HoTT
Module
bind
n/a
Change to the next screen page with a brief tap on
the
SET
key of the right touch pad. This will open a
screen of characters for entry of the model's name.
A maximum of 13 characters can be used to specify
a model name.
!"#$%&'()
+,–./0123456789:;
@ACDEFGHIJKLMNOPQRSTUVWXYZ[¥]^_
`abcdefghijklmnopqrstuvwxyz{|}~
¢ÇüéâäàåçêëèïîìÄÅÉæÆôöòûùÖÜ
Starle
Model name
84
Detail program description - Base setup models | Winged models
Now the desired characters can be selected with the
selection keys of the left touch pad. Move to the next
position to select the next character with a tap on
the of the right touch pad or its center
simultaneous tap on the or keys of the right
touch pad (CLEAR) will place a space character at
the current position.
Positioning to any character position within the entry
fi eld can be done with the keys of the right touch
pad.
A return to the previous menu screen is accomplished
with a tap on the center
pad.
A model name entered in this manner will appear in
the base screen of the »Model select« menu and in
the sub-menus of the »Copy / Erase« menu item.
Info
B A S I C
Model name
1
Info
n/a
n/a
Stick mode
Module
HoTT
Every model can be given a supplementary note of
up to 12 characters (maximum) by following the same
procedure as already described for creating a "Model
name". This info note will appear as a supplement in
the »Model select« menu and in the sub-menus of
?
the »Copy / Erase« menu item.
SET
key. A
ESC
key of the left touch
S E T T I N G S , M O D E L
Starlet
1
bind
n/a
n/a
n/a
Stick mode
"MODE 1" (Throttle at right stick)
"MODE 2" (Throttle at left stick)
pitch axis
throttle
throttle
pitch axis
throttle
throttle
"MODE 3" (Throttle at right stick) "MODE 4" (Throttle at left stick)
pitch axis
Motor/Pitch
throttle
pitch axis
throttle
throttle
Basically there are four different ways to assign the
four helicopter control functions, roll, nick, tail rotor
and throttle/pitch to the two joysticks. Just which of
these is used depends on the preferences of the
individual model pilot.
Use the selection keys of the left or right touch
pad to select the "Stick mode" line. The option fi eld
will be framed.
B A S I C
S E T T I N G , M O D E L
Model name
Starlet
Info
1234g/111111
Stick mode
Module
HoTT
bind
n/a
Tap on the
SET
key. The currently displayed stick
mode will be displayed in inverse video. Now use the
selection keys of the right touch pad to select from
among options 1 through 4.
A simultaneous tap on the or keys of the
right touch pad (CLEAR) will reset the display to
stick mode "1".
pitch axis
pitch axis
pitch axis
pitch axis
1
n/a
n/a
SEL
Advertisement
Table of Contents
