GRAUPNER mc-32 Programming Manual page 243

Hide thumbs Also See for mc-32:
Table of Contents

Advertisement

VOLT:
MODELTIME:
BATTERYTIME:
TIMER(GE.)TOP:
TIMER(GE.)CENTER:
PHASE TIMER:
TIME:
RECEIVER
After selection of the desired menu line with the 
selection keys of the left or right touch pad ...
VOICE TRIGGER
TRIG
VARIO
TRANSMIT
RECEIVER
... and a subsequent tap on the center
the right touch pad will open the selected sub-menu:
TEMP:
STRENGHT:
VOLT:
LOWVOLT:
FLUGZEITUHR:
UHRZEIT:
Here, after selection of the desired line with the 
selection keys of the left or right touch pad and a
subsequent tap on the center
SET
touch pad, the selected voice message can be
activated (
) or deactivated (
).
SENSOR
This line only appears if a sensor was fi rst activated
in the »SENSOR SELECT« sub-menu. For example,
if the »VARIO« sensor is selected then the selections
for the "VARIO" line will be opened ...
VOICE TRIGGER
VARIO
TRANSMIT
RECEIVER
VARIO
when a subsequent tap on the center
right touch pad calls up the sub-menu.
1
8
ALT:
MAXALT:
MINALT:
VOLT MINIMUM:
FLUGZEITUHR:
SET
key of
UHRZEIT:
As described in the column at the left, these menus
also allow every offered voice message to be
activated (
desired line followed by a tap on the center
of the right touch pad.
Note:
The selection made here is completely independent
of the "VARIO" voice triggers.
key of the right
8
SET
key of the
) or deactivated (
) by selecting the
SET
key
Detail program description - Telemetry
243

Advertisement

Table of Contents
loading

Table of Contents