Upper Housing / Printer Cover - Epson Stylus Office T1110 Service Manual

_______________________________________________________________________________________
WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100

4.2.7 Upper Housing / Printer Cover

1. Remove the Decoration Plate Left/Right. (p.71)
2. Remove the Panel Unit. (p.69)
3. Remove the seven C.B.P. M3 x 10 screws that secure the Upper Housing.
4. Remove the Upper Housing while pulling out the Panel FFC through the cutout of
the Upper Housing.
1) C.B.P. M3x10
(6±1 kgf.cm)
6
1) C.B.P. M3x10 1) C.B.P. M3x10
(6±1 kgf.cm) (6±1 kgf.cm)
5
2
Figure 4-15. Remove the Upper Housing
_______________________________________________________________________________________
打印机维修论坛 http://www.printerwhy.net/
Disassembly And Assembly
高速行式打印机 http://www.lineprinter.com.cn/
1) C.B.P. M3x10
(6±1 kgf.cm)
7
Upper Housing
1) C.B.P. M3x10
(6±1 kgf.cm)
3
4
1
Removing the Housings
Route the Panel FFC correctly as shown in
Install the Upper Housing so that the Grounding Plate properly
protrudes through the cutout of the Upper Housing.
Upper Housing
Grounding Plate
Figure 4-16. Routing the Panel FFC
Tighten the screws in the order shown in
After replacing the following parts, be sure to apply G-74 grease to the
A D J U S T M E N T
R E Q U I R E D
area specified for each part.
Upper Housing: See Figure 6-14 on page 158.
打印机驱动下载 http://www.printerwhy.com/
Revision A
Figure 4-12.
Figure 4-15.
72
Confidential