Front Paper Guide Pad - Epson Stylus Office T1110 Service Manual

_______________________________________________________________________________________
WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100

4.4.9 Front Paper Guide Pad

1. Remove the Printer Mechanism.
Mechanism (p.86).)
2. Remove the Front Paper Guide Pads from the Front Paper Guide with tweezers.
Front Paper Guide Pad
Figure 4-98. Removing the Front Paper Guide Pad
Take care to prevent the grease contained on the Front Paper
C A U T I O N
Guide Pads from sticking to other parts.
_______________________________________________________________________________________
打印机维修论坛 http://www.printerwhy.net/
Disassembly And Assembly
高速行式打印机 http://www.lineprinter.com.cn/
(Refer to 4.4.4 Lower Housing / Printer
Front Paper Guide
Disassembling the Printer Mechanism
After installing the Front Paper Guide Pads, lift the Printer
Mechanism, and check the following points.
1. Make sure that the tabs on the Pads are not cut midway.
2. Make sure that all tabs are in place on the Front Paper Guide,
and that they are facing down (towards the Waste Ink Pads)
without any folds.
3. Make sure that the tab foldbacks are protruding completely
from the Front Paper Guide.
Tabs
Figure 4-99. Reinstalling the Front Paper Guide Pad (1)
4. Make sure that the pad is placed under a tab of the Front Paper
Guide.
OK
Figure 4-100. Reinstalling the Front Paper Guide Pad (2)
5. Make sure that all the tabs on the pads are fitted into the
securing section under the Front Paper Guide.
打印机驱动下载 http://www.printerwhy.com/
Revision A
Tabs
NG
103
Confidential