_______________________________________________________________________________________
WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
5.2.5 PF adjustment
PF- for standard print area
The following pattern is printed.
1
-1
-3
-5
Figure 5-5. PF (standard print area) Adjustment Printout Pattern
How to Judge
Examine the printout patterns, and enter the value for the pattern with no overlap and
gap between the upper and lower ones.
Example for judgement
C H E C K
P O I N T
NG
_______________________________________________________________________________________
打印机维修论坛 http://www.printerwhy.net/
Adjustment
高速行式打印机 http://www.lineprinter.com.cn/
0
-2
-4
OK
NG
Adjustment Using Adjustment Program
PF- for bottom margin area
The following pattern is printed.
How to Judge
Examine the printout patterns, and enter the value for the pattern with no overlap and
gap between the upper and lower ones.
Upper pattern
1
2
3
Lower pattern
Figure 5-6. PF (bottom margin area) Adjustment Printout Pattern
Additional information
When overlap and gap are observed in the all patterns, enter the value for the best one,
and print the adjustment pattern again.
Example for judgement
C H E C K
P O I N T
Overlap
NG
打印机驱动下载 http://www.printerwhy.com/
Revision A
4
5
6
7
8
Gap
OK
NG
Confidential
140