Decoration Plate Left/Right - Epson Stylus Office T1110 Service Manual

_______________________________________________________________________________________
WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100

4.2.6 Decoration Plate Left/Right

1. Remove the Rear Housing. (p.68)
2. Remove the Front Decoration Plate Left/Right. (p.68)
3. Release the three hooks on the front of the Decoration Plate Right and lift the plate
a little to release the tab and the four guide pins on the upper side, then remove the
Decoration Plate Right.
4. In the same way, remove the Decoration Plate Left.
Figure 4-13. Removing the Decoration Plate Left/Right
_______________________________________________________________________________________
打印机维修论坛 http://www.printerwhy.net/
Disassembly And Assembly
高速行式打印机 http://www.lineprinter.com.cn/
Guide pin (x4)
Decoration Plate
Right
Tab
Hook (x3)
Removing the Housings
When installing the Decoration Plate L/R, first align the hooks of
the Decoration Plate L/R (two each) with the ribs of the Lower
Housing (two each on the left/right), and then align the tab inside
the Decotrative Plate L/R (one each) with the positioning hole on the
Upper Housing (one each on the left/right).
Figure 4-14. Reinstalling the Decoration Plate Left/Right
打印机驱动下载 http://www.printerwhy.com/
Revision A
Positioning hole
Tab
Hooks and Ribs
71
Confidential