Epson Stylus Office T1110 Service Manual page 44

_______________________________________________________________________________________
WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
Occurrence
Phenomenon Detail
Timing
At power-on While the power-on sequence is
being executed, Fatal error is
displayed.
_______________________________________________________________________________________
打印机维修论坛 http://www.printerwhy.net/
Troubleshooting
高速行式打印机 http://www.lineprinter.com.cn/
Table 3-11. Troubleshooting of Fatal Error
Faulty Part/
Part Name
APG Sensor 1. Check the APG Sensor connector cables is connected to the
APG Sensor connectors.
2. Check if the connector cables of the APG Sensor is broken.
3. Check the APG Sensors for damages.
Overview
Check Point
APG Sensor connector cables
APG Sensors
打印机驱动下载 http://www.printerwhy.com/
Revision A
Remedy
1. Connect the APG Sensor connector cables to
the APG Sensor connectors.
2. Replace the ASF Assy with a new ones.
3. Replace the APG Assy with a new one.
Confidential
44