Ldap Client Configurations; Figure 13: Add New Ldap Phonebook - Grandstream Networks UCM6102 User Manual

Figure 13: Add New LDAP Phonebook

LDAP CLIENT CONFIGURATIONS

To configure the LDAP client so the default PBX phonebook can be used, follow the instructions in the
LDAP Client Configuration section.
Suppose your server Base DN is "dc=Grandstream", your extension number is 1000 and your LDAP entry
password is "1000", configure your LDAP client as follows (case insensitive):
Base DN: dc=Grandstream
Root DN: AccountName=1000,dc=Grandstream
Password: 1000
Filter: (&(CallerIDName=*)(AccountName=*))
Port: 389
The following figure shows the configuration information on a GXP2200 to successfully use the LDAP
server as configured in .
Figure 12: LDAP Server Configurations
Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL Page 29 of 108