Turn Signal Switch; Clutch Lever - Victory Motorcycles Vision Tour Rider's Manual

Instruments, Features and Controls

Turn Signal Switch

The turn signal switch is located on the left handlebar. Use
the switch to activate a turn signal. The key must be in the
ON or ACC position.
• Push the switch to the left to activate the left turn signals.
• Push the switch to the right to activate the right turn
signals.
Turn signals automatically cancel after predetermined speed
and distance conditions are met. To manually cancel a signal,
move the switch to the center position and press it inward.
Tip: The momentary signal feature is useful when passing or
changing lanes. To use the momentary feature, push and hold
the switch through at least one complete flash cycle (at least
one second) to activate the feature. The signal will then cancel
the moment the switch is released.

Clutch Lever

The clutch lever is located on the left handlebar.
Disengage the clutch before shifting gears. For
smooth clutch operation, pull the lever quickly
and release it gradually.
• To disengage the clutch, pull the lever toward
the handlebar.
• To engage the clutch, gradually release the
lever.
Starter Interlock Switch
The starter interlock switch is located on the left handlebar. This switch prevents the electric
starter from operating when the transmission is in gear and the clutch is engaged (lever
released). Read the engine starting procedures beginning on page 51 before starting the
engine.
WARNING! Never start the engine with the transmission in gear and the clutch disengaged unless you
are properly seated with the front brake applied.
32
Interlock
Switch
Turn Signal
Switch
Clutch
Lever