Aux - Ipod - Victory Motorcycles Vision Tour Rider's Manual

AUX / iPod
Input Cable Setup
The AUX and iPod input cables are
connected to the audio system through a
small hole in the left console storage bin.
Only one input cable can be connected at
any given time.
To use the iPod, connect the iPod input
cable.
AUX Input
Cable
130
iPod Input
Cable
To change an input cable:
1. Open the left console storage bin.
2. Locate the input cable and sealing
grommet at the bottom of the bin.
3. Carefully pull the cable inside the bin.
4. Disconnect the cable from the harness
by carefully pushing up on the green
tab. DO NOT ALLOW THE
HARNESS TO DROP BACK
THROUGH THE HOLE.
5. Install the desired input cable.
6. Carefully push the sealing grommet
back into the hole.
AUX Input
Cable