Victory Motorcycles Vision Tour Rider's Manual page 100

Cleaning and Storage
Windshield Care (if equipped)
Clean the windshield with a soft cloth and plenty of warm water. Dry with a soft clean cloth.
Remove minor scratches with a high-quality polishing compound designed for use on
polycarbonate surfaces.
NOTICE: Brake fluid and alcohol will permanently damage the windshield. Do not use glass cleaners,
water or soil repellents, and petroleum or alcohol based cleaners on the windshield, as
these products can damage the windshield.
Suede Paint (Matte Clear Coat) Finish Care
Suede paint finishes are prone to trapping dirt, oils and other contaminants. Always clean
this type of finish with warm water and a mild dish-washing detergent. Use a soft sponge to
gently rub the surface, then rinse with clean warm water. For stubborn stains such as grease
or oil, use a citrus-based cleaner. Spray the cleaner onto the area and rub gently with a soft
sponge. Allow the cleaner to sit for a couple of minutes, then rinse well with clean warm
water. Repeat as needed.
Apply VICTORY Suede Finish Protectant. Follow the instructions on the container.
NOTICE: Never use a polishing/buffing wax or any sponge that has an abrasive surface when
cleaning a matte finish. These products will buff the matte surface of the finish and result in
a glossy finish. Never clean matte finishes with a pressure washer, as this will further imbed
contaminants into the clear coat and may damage labels and decals.
98