Victory Motorcycles Vision Tour Rider's Manual page 129

Push-to-Talk (PTT)
Press and hold the
top or bottom of the
PTT button to
transmit over CB
radio. The passenger
must push and hold
the rear PTT button.
"TX" will display on the console screen
when one of the PTT buttons is pressed.
"RX" will display when the CB is receiving
a transmission.
FM
ICOM
TX19
Transmitting
FM
ICOM
RX19
Receiving
Passenger CB Radio Volume
The passenger can control rear headset
volume when Entertainment, CB radio or
ICOM is active.
Tip: Each volume setting is
independently adjustable.
Press (+) or (-) on the
passenger control to raise or
lower volume.
100.5
100.5
CB Radio / ICOM System
Squelch
Squelch blocks
undesired signals and
noise by allowing the
reception of signals
only over a specified
level.
Press and release
the SQ (+) or SQ
(-) buttons to
adjust the
squelch to any
level between OPEN and CLOSED.
When squelch is set to OPEN, no filtering
occurs. Setting squelch to CLOSED blocks
all signals, including strong signals.
To set the squelch level, first lower the
squelch level until noise or static is audible.
Gradually increase the squelch level until
the noise or static is gone.
Press S/E on the left
control to exit the
screen and return to
the main display.
Driver CB
Radio Volume
To change
settings, enter the
mode menu. Press
(+) or (-) on the
console panel to adjust settings. Press S/E to
save and exit.
Tip: The CB volume can also be set using the
hand control when the CB is receiving.
+
SQUELCH 8
SQ
-
+
CB VOL 15
-
127