Tilt Sensor; Mode Button - Victory Motorcycles Vision Tour Rider's Manual

Instruments, Features and Controls
Seat Heater Switches
High Low
Seat heater switches (if equipped) are located on the seat
Off
under the left passenger hand grip. The low heat setting is
adequate for most conditions. Use the high heat setting
with caution.
• The front switch controls the driver's seat heater.
• The rear switch controls the passenger's seat heater.

Tilt Sensor

A tilt sensor stops the engine if the motorcycle tips beyond 45 degrees to one side. The check
engine light will also illuminate. To restart the engine, cycle the ignition switch to the OFF
position, wait 10 seconds, then restart the engine.

Mode Button

The mode button is located on the front side of the
left handlebar switch. Use the mode button to
toggle through the modes of the multi-function
display. See page 26. Use the mode button to set
the display units to either standard or metric units
of measurement. See page 27.
Tip: If "Err" displays while toggling through the features,
a system error has been logged. See page 27.
Mirrors
Adjust the rear view mirrors by applying light pressure at
the outer edges of the mirror.
30