Engine Coolant - Can-Am MAVERICK Trail 2021 Series Operator's Manual

Inspect radiator and hoses for leaks or
any damage.
Inspect radiating fins. They must be
clean, free of mud, dirt, leaves and any
other deposit that would prevent the
radiator to cool properly.
If available, use a garden hose to rinse
the radiating fins.
CAUTION Never clean radiator
with your hands when it is hot. Let
the radiator cool down before clean-
ing.
NOTICE
Be careful not to damage
the radiating fins when cleaning. Do
not use any object/tool that could
damage the fins. When hosing, use
low pressure only. Never use a HIGH
PRESSURE washer.

Engine Coolant

Engine Coolant Level Verification
WARNING
Check coolant level with engine
cold.
1. Place vehicle on a level surface.
2. Remove the coolant tank access
cover.
219001880-033_a
1. Coolant tank access cover
In order to avoid potential burns,
do not remove the pressure cap if
the engine is hot.
3. Ensure cooling system is full up to
the Max line.
tmo2016-010-004_a
PARTS REMOVED FOR CLARITY
Adding Coolant
1. Remove the coolant tank pressure
cap.
219001880-034_b
2. Add coolant in system as neces-
sary. Use a funnel to avoid spillage.
Do not overfill.
3. Properly reinstall pressure cap on
cooling tank.
4. Reinstall cooling tank access cover.
NOTE: A cooling system that fre-
quently requires addition of coolant
is an indication of leaks or engine prob-
lems.
______________
MAINTENANCE PROCEDURES
WARNING
113