Indicator Lamps - Can-Am DS 450 EFI X mx Operator's Manual

vmo2008-018-037
TYPICAL
6. Properly reinstall removed parts in
the reverse order of their removal.
7. Check light operation.
Front Position Lamps Bulbs
Replacement
To replace the front position lamp bulb
located in the headlight housing, pro-
ceed as follows:
1. Turn the ignition switch to OFF.
2. Pull lamp socket out of headlight
housing.
vmo2008-018-027_a
1. Position lamp socket
2. Headlight housing
3. Pull bulb out of the socket.
4. Install the new bulb by pushing it in
the socket.
5. Put the position lamp socket back in
the headlight housing by pushing it
in the opening.
6. Check light operation.
Taillight Bulb Replacement
1. Turn the ignition switch to OFF.
2. Unscrew lens screws to expose
bulb.
vmo2008-011-049_a
TYPICAL
1. Screws
3. Push bulb in and hold while turning
counterclockwise to release.
4. Install the new bulb by first pushing
in while turning clockwise.
5. Check light operation.

Indicator Lamps

Indicator Lamps Bulbs Replacement
1. Remove fuel tank cap.
2. Remove console.
______________
MAINTENANCE PROCEDURES
111