Removing The Base Cover; Procedure - Dell Alienware 15 R4 Service Manual

Removing the base cover

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Procedure

1 Remove the six screws (M2.5x13) that secure the base cover to the computer
base.
2 Loosen the captive screw that secures the base cover to the computer base to
open a gap between the two parts.
computer. After working inside your
After working inside your computer.
15