Hardware Installation; Installation Notes - NCR Columbus 800 User Manual

NCR Orderman Columbus800
4

Hardware Installation

Installation Restrictions
Install the NCR Orderman Columbus800 POS near an electrical outlet that is easily accessible. Use
the power cord as a power disconnect device.
- Do not permit any object to rest on the power cord. Do not locate the NCR Orderman
Columbus800 POS where the power cord can be walked on.
- Use a grounding strap or touch a grounded metal object to discharge any static electricity
from your Body before servicing the NCR Orderman Columbus800 POS.
This unit contains hazardous voltages and should only be serviced by qualified service
personnel.
Do not connect or disconnect the transaction printer while the terminal is in. This can
result in system or printer damage.
4.1

Installation Notes

Cable Restraint
The Columbus800 includes a cable management system with cable strap to prevent accidental
disconnects and tampering. The strap is opened, peripheral connections are made, the strap is
closed, and then cables are then routed thorough the slot in the base.
Footprint
An area of no less than 18" inches square is necessary to properly install a Columbus800 unit with
MSR and side module. This will accommodate the unit as well as its associated mounting hardware.
For customer display attached, see user guide for specific dimensions.
Power
For tilt stand option, the Columbus800 has an integrated 90 watt power supply rated for 110V and
240V (Auto-sensing), 50Hz or 60Hz located in the base. With the powered USB 24V option, the
power supply is a 150W external power brick with for 110V and 240V (autosensing), 50Hz or 60Hz.
Source power is drawn from a regular AC wall outlet. The electronics are "universal" – that is, they
will function when connected to standard wall outlets of most nationalities around the world. For use
in locales other than North America, special wall outlet adapters or cables will be required. For
international configurations of the Columbus800, typically the country specific power cord is ordered
separately.
Orderman GmbH (Part of NCR Corporation)
User Guide V01.00
20
Hardware Installation