Power Supply Bracket - NCR Columbus 800 User Manual

NCR Orderman Columbus800
5. Hang the terminal on the VESA Mount.
Fig. 35: Hang on VESA Mount
8.2

Power Supply Bracket

Fig. 36: Power Supply Bracket
1. Attach the Power Supply Bracket beside the VESA Mount.
Note: To install the Power Supply Bracket independently from the VESA Mount, refer
Orderman GmbH (Part of NCR Corporation)
User Guide V01.00
 Insert the mushroom studs on the Wall Mount into the elongated slots on
the VESA Mount.
 Slide the terminal down to lock the brackets together.
 Secure the brackets with the thumbscrew.
Thumbscrew
Wall Side of Bracket
Power Supply Bracket
497-0506970
 a. Loosen the screws (2) of the VESA Mount.
 b. Hook the Power Supply Bracket over the screws. Retighten the
screws.
to the dimensions or use the bracket as a template to mark the location of the
holes.
43
Installing Wall Mount with Expansion