Chapter 2: Hardware Installation; Installation Restrictions - NCR 7601 User Manual

Hardware Installation
Chapter 2:
This chapter explains how to install the RealPOS 60 hardware, including out-of-box
installation and how to install the optional peripheral devices. The 7601 is very flexible
to install. This document discusses a typical configuration. Your configuration may
require adjustments to the procedures.

Installation Restrictions

• Before installing the RealPOS 60, read and follow the guidelines in the RealPOS 60
• Install the RealPOS 60 near an electrical outlet that is easily accessible. Use the
• Do not permit any object to rest on the power cord. Do not locate the RealPOS 60
• Use a grounding strap or touch a grounded metal object to discharge any static
Caution:
qualified service personnel.
Caution:
on. This can result in system or printer damage.
Site Preparation Guide (B005-0000-2012) and the NCR Workstation and Peripheral
AC Wiring Guide (BST0-2115-53).
power cord as a power disconnect device.
where the power cord can be walked on.
electricity from your body before servicing the RealPOS 60.
This unit contains hazardous voltages and should only be serviced by
Do not connect or disconnect the transaction printer while the terminal is