Out-Of-Box Powering Up; Administrator Login - NCR Columbus 800 User Manual

NCR Orderman Columbus800

5 Out-Of-Box Powering Up

1. After installing the terminal, power up the system by pressing the Power Switch, which is
located behind the Cable Cover.
Fig. 29: Powering Up
The system installs the system devices, system settings, and then reboots to continue
setup. Complete the System Setup. This varies from OS to OS but the following is typical.
2. The initial setup procedures are performed.
3. At the prompts select the
Click Next.
4. Enter a
5. Accept the
6. Set the
5.1

Administrator Login

The Columbus800 terminal will automatically log you in as a user with the following credentials:
Orderman GmbH (Part of NCR Corporation)
Power Switch
 Starting Windows
 Preparing the computer for first time.
 Checking video performance
Country or
Computer Name. Click Next.
License Terms. Click Next.
Time Zone, Date, and Time. Click Next.
 Username:
 Password:
User Guide V01.00
region, Time and
User01
User01
38
Out-Of-Box Powering Up
currency, and Keyboard Layout.