Chapter 2: Hardware Installation; Installation Restrictions; Ergonomic Workplace - NCR 7772 Series User Manual

Hardware Installation
Chapter 2:

Installation Restrictions

• The NCR CX7 All-in-One POS (7772) conforms to all applicable legal requirements.
• Install the CX7 near an electrical outlet that is easily accessible. Use the power cord
• Do not permit any object to rest on the power cord. Do not locate the CX7 where
• Use a grounding strap or touch a grounded metal object to discharge any static
Warning:
qualified service personnel.
Caution: Do not connect or disconnect the transaction printer while the terminal is on.
This can result in system or printer damage.

Ergonomic Workplace

The NCR CX7 All-in-One POS (7772) has a high–brightness LCD with an anti–glare
screen. For best results, please observe the following when considering the terminal
workplace:
• Avoid direct–glaring and reflective–glaring light. Locate the terminal in a controlled
• If possible, avoid reflective glaring caused by electric light sources.
• Position the terminal for ideal viewing angles.
To view the compliance statements see the
Regulatory Statements
as a power disconnect device.
the power cord can be walked on.
electricity from your body before servicing the CX7 terminal.
This unit contains hazardous voltages and should only be serviced by
luminance surrounding. When installed next to windows position the terminal so it
does not reflect the outside light.
(B005-0000-1589).
NCR RealPOS Terminals Safety and