NCR Columbus 800 User Manual page 42

NCR Orderman Columbus800
2. Remove the Expansion Module from the terminal.
Fig. 33: Remove Expansion Module
3. Install the Wall Mount Bracket (with the thumbscrew facing up) onto the Expansion Module
with the supplied screws (3).
Fig. 34: Wall Mount Bracket
4. Reinstall the Expansion Module onto the terminal.
Orderman GmbH (Part of NCR Corporation)
User Guide V01.00
 Loosen the screws (2).
 Pivot the bottom end of the module up and then remove the extensions
on the top end from the slots in the rear cabinet.
Screws
42
Installing Wall Mount with Expansion
Expansion Module Extensions