Power Supply Bracket - NCR Columbus 800 User Manual

NCR Orderman Columbus800
9.2

Power Supply Bracket

Fig. 44: Power Supply Bracket
1. Attach the Power Supply Bracket beside the VESA Mount.
Note: To install the Power Supply Bracket independently from the VESA Mount, refer
2. Insert the power supply into the bracket (AC Connector on top).
Fig. 45: Insert Power Supply
Orderman GmbH (Part of NCR Corporation)
User Guide V01.00 Installing Wall Mount with no Expansion
 Loosen the screws (2) of the VESA Mount.
 Hook the Power Supply Bracket over the screws. Retighten the screws.
to the dimensions or use the bracket as a template to mark the location of the
holes.
AC Connector
Power Supply Bracket
497-0506970
48