Safety Requirements - NCR Columbus 800 User Manual

NCR Orderman Columbus800
1.3.2

Safety Requirements

The NCR Orderman Columbus800 POS conforms to all applicable legal requirements. To view the
compliance statements see the
(B005-0000-1589).
Warning
The on/off switch is a logic switch only. The AC line voltage primaries are live at all
times when the power cord is connected. Therefore, disconnect the AC power cord
before opening the unit to install features or service this terminal
Lithium Battery Warning
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type as recommended by the manufacturer. Discard used
batteries according to the manufacturer's instructions.
Il y a danger d'explosion s'il y a remplacement incorrect de la batterie.
Remplacer uniquement avec une batterie du même type ou d'un type recommandé
par le constructeur. Mettre au rébut les batteries usagées conformément aux
instructions du fabricant.
Battery Disposal (Switzerland)
Refer to Annex 4.10 of SR814.013 for battery disposal.
IT Power System
This product is suitable for connection to an IT power system with a phase-to-phase voltage not
exceeding 240 V.
Peripheral Usage
This terminal should only be used with peripheral devices that are certified by the appropriate safety
agency for the country of installation (UL, CSA, TUV, VDE) or those which are recommended by
NCR Corporation.
Warning
DO NOT connect or disconnect the transaction printer while the terminal
is connected to AC power. This can result in system or printer damage.
DO NOT connect or disconnect any serial peripherals while the terminal
is connected to AC power. This can result in system or printer damage.
Orderman GmbH (Part of NCR Corporation)
User Guide V01.00
NCR RealPOS Terminals Safety and Regulatory Statements
7
General information