Table of Contents
Advertisement
Hardware Installation
Chapter 2:
This chapter explains how to install the RealPOS XR6 hardware, including out-of-box
installation and how to install the optional peripheral devices. The 7603 is very flexible
to install. This document discusses a typical configuration. Your configuration may
require adjustments to the procedures.
Installation Restrictions
• Before installing the RealPOS XR6, read and follow the guidelines in the RealPOS
• Install the RealPOS XR6 near an electrical outlet that is easily accessible. Use the
• Do not permit any object to rest on the power cord. Do not locate the RealPOS XR6
• Use a grounding strap or touch a grounded metal object to discharge any static
Caution:
qualified service personnel.
Caution:
on. This can result in system or printer damage.
XR6 Site Preparation Guide (B005-0000-2401) and the NCR Workstation and
Peripheral AC Wiring Guide (BST0-2115-53).
power cord as a power disconnect device.
where the power cord can be walked on.
electricity from your body before servicing the RealPOS XR6.
This unit contains hazardous voltages and should only be serviced by
Do not connect or disconnect the transaction printer while the terminal is
Hide quick links:
Advertisement
Table of Contents
