NCR Orderman Columbus800
4.10 Starting Up the Columbus800
In order to run your operating system and access your software and data, you must start up the
Columbus800 platform. To start up the Columbus800, complete the following step:
Note: Depending on your installed operating system and your selected settings, your
4.11 Using External Connectors
In order to use the Columbus800 system to run your business' software, you can set up several
peripheral components. The Columbus800 is compatible with standard PC equipment, including a
USB mouse, USB keyboard, printer, speakers, network connectivity, as well as any other devices
that can be supported by your operating system.
Fig. 28: I/O Panel
4.11.1 RJ12 Serial Port
*
Front view looking into the connector
Orderman GmbH (Part of NCR Corporation)
Simply plug the power cord into an electrical outlet. The system
automatically turns on once plugged into the outlet.
system will vary in the amount of time it takes to boot up.
Pin Diagram
*FRONT VIEW
User Guide V01.00
Pin
1
2
3
4
5
6
32
Hardware Installation
Signal Name
POWER / RTS
GND
TX
RX
GND
CTS