Controlled Deployment
Chapter 2:
Installation Restrictions
Hardware Installation
This section explains how to perform an out-of-box installation of the NCR PX10 POS
(7746) hardware and its respective peripheral devices.
Before installing the NCR PX10 POS (7746), read and follow the guidelines in the NCR
PX10 POS (7746) Site Preparation Guide (BCC-0000-5288) and the NCR Workstation and
Peripheral AC Wiring Guide (BST0-2115-53).
• Install the NCR PX10 POS (7746) near an electrical outlet that is easily accessible. Use
the power cord as a power disconnect device.
• Do not permit any object to rest on the power cord. Do not locate the NCR PX10
POS (7746) where the power cord can be walked on.
Caution: Use a grounding strap or touch a grounded metal object to discharge any
static electricity from your body before servicing the NCR PX10 POS (7746) terminal.