Table of Contents
Advertisement
Menu/ Display
Shown only when Signal Source is attached
1.
Press MENU button of remote control or projector to turn on the OSD.
2.
Press
button to Display category.
3.
Press
button to select the beneath function for your needs.
4.
Press the
button key to adjust the function values
5.
Press Enter key to confirm the selection
6.
Press MENU button to leave the menu or press ▲ button to back to menu category after Enter key
confirming the selection.
Feature
Aspect Ratio
Keystone
Horizontal Position
Vertical Position
Phase
H Size
Digital Zoom
Selection
Auto
Native
Select aspect ratio.
4:3
16:9
-20° ~ +20°
Vertical Keystone correction
Adjust the horizontal position of the projected image (Only
VGA Active)
-5 ~ +5
Different source timing obtains the different range, some
sources may obtain the narrow range.
Adjust the vertical position of the projected image (Only
VGA Active)
-5 ~ +5
Different source timing obtains the different range, some
sources may obtain the narrow range.
Adjust the clock phase to reduce image distortion (Only
0 ~ 31
VGA Active)
Adjust the horizontal width of the image (Only VGA
-5 ~ +5
Active)
Digital Zoom is capable to scale part of the input image to
0% ~100%
a larger size to increase visibility at a distance.
20
Description
Advertisement
Table of Contents
