Basic Operation; Turn On The Projector - Eiki EK-120 Series Owner's Manual

Turn on the projector

1. Complete peripheral connections (with a
computer, video,etc.) before turning on the
projector.
2. Connect the projector's AC power cord into
the AC outlet. The POWER indicator turns
red.
3. Press the POWER button on the top control
or on the remote control. The POWER
indicator becomes green and the cooling
fans start to work. The preparation display
appears on the screen.
4. If the projector is locked with a PIN code, a
PIN code input dialog box appears. Enter
the PIN code as instructed below.
 Note:
● When the logo select is set to be "Off", the
logo will not be displayed on the screen.(See
page 46)
Enter a PIN code
Press the OK button, press ◄► button to
select a number and press the OK button to
enter it to the PIN code box, then number
changes to "*", automatically move the cursor
to next box. If you fixed an incorrect number,
press MENU button to reset it again.
Repeat the steps to complete entering a three-
digit number.
After entering the three-digit number,
automatically move the cursor to "Set", press
the OK button then you can start to operate the
projector.
If you entered an incorrect "PIN code", the
number (***) turn red. PIN code will be reset
within one second automatically, Enter the
correct PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a
security code that allows the person who knows
it to operate the projector. Setting the PIN code
can prevent unauthorized use of the projector.
A PIN code consists of a three-digit number.
Refer to the PIN code lock function in the
"Expand" "Security" menu on page 47 for PIN
code lock operation of the projector.
20

Basic operation

-----
Move
Move the cursor to "Set", and press "OK".
16
PIN Code
Set
Cancel
Input PIN code
OK
PIN Code
*
Set
Cancel
Select
OK
Caution on handling the PIN code
If you forget your PIN code, the
projector can no longer be started.
Take a special care in setting a
new PIN code. Write down the
number in a column on page 81 of
this manual and keep it properly.
Should the PIN code be missing
or forgotten, consult your dealer or
service center.
Back
Esc
Back
Esc