Vari Lite VL2402 User Manual page 86

VARI LITE® - VL2402™ W
To edit or modify a cue:
1. Recall cue to be changed from PCue.
2. Change luminaire data to desired levels using Man (Manual Command)
3. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
4. Press [Up] / [Down] arrows until Mod appears. Press [Enter]. The number
5. Press [Enter] and changes will be saved.
To play cues as a sequence:
1. Press [Menu].
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
3. Press [Up] / [Down] arrows until PSEQ appears. Press [Enter] and the
To change the follow time in a sequence:
The follow time is stored for each cue individually.
1. Select cue to be changed from PCue.
2. Go to Mod to modify active cue and press [Enter] to save the change.
3. Set FLTM (Follow Time) to desired value (refer to
To delete a sequence and all cues:
1. Press [Menu].
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
3. Press [Up] / [Down] arrows until DSEQ appears. Press [Enter].
4. OK? prompt will appear. Press [Enter] to delete stored sequence.
68
L U
ASH UMINAIRE
functions.
displayed is the same as the selected cue.
sequence will play. The active cue will be shown in the display. [Enter] to
start, [Menu] to stop.
cues:" on page 67).
17-Sept-01
' M
SER S ANUAL
"Set follow time between
02. 9671.0 001 C