Default State; Decimal Placement; Display Test - Vari Lite VL2402 User Manual

Default State

The menu display's default state during normal operation is to display the address
(Virtuoso or DMX). After 10 seconds of inactivity at the display, it will change to the
default state.
After longer periods of inactivity, the menu display will switch to its off state. The
default state for this feature is 5 minutes, however, different time lengths and a stay on
option can also be programmed.
To program a different time length for menu off feature:
1. Press [Menu].
2. Press [Up] / [Down] arrows until CFG (Configuration) appears. Press
3. Press [Up] / [Down] arrows to access DisP (Display). Press [Enter].
4. Press [Up] / [Down] arrows to select either 30s (30 sec), 5M (5 minutes),

Decimal Placement

A decimal to the right of a menu display readout can indicate two things:
Virtuoso address - for example, XXXX.
•
• One of two pages - for example, the eight-digit luminaire ID number page 1:
XXXX. and page 2: XXXX

Display Test

The Display Test will display every character on the menu display to check for
missing characters.
The following procedure is used to test the display.
02.9 671.00 01 C
[Enter].
10M (10 minutes), or ON (on indefinitely). Press [Enter] to set.
1) Press [Menu].
2) Press [Up]/[Down] until Test appears. Press [Enter].
3) Press [Up]/[Down] until DISP appears. Press [Enter]. All segments
in the alpha-numeric display should be lit.
17-Sept-01
M S : O
ENU YSTEM PERATION
Decimal Indicator
4
53