Vari Lite VL2402 User Manual page 36

VARI LITE® - VL2402™ W
3. While pulling up on locking mechanism release, fit keyed holes onto raised
WARNING: Ensure that the bracket locking mechanism is fully seated after the
bracket is installed on the luminaire.
Press up when
installing or releasing
18
L U
ASH UMINAIRE
mounting buttons at bottom of enclosure. Slide forward and release locking
mechanism to lock in place. Ensure brackets are locked securely. (Always
face brackets in same direction as shown.)
Locking Mechanism
Raised
Mounting
Button
Once fitted over buttons,
slide forward to lock
in place
Locked
17-Sept-01
' M
SER S ANUAL
Truss Hook Bracket
Keyed Hole
Face brackets in
same direction for
all configurations
02. 9671.0 001 C