Vari Lite VL2402 User Manual page 85

Set follow time between cues:
The following procedure is used to set the follow time between each cue. The value
can be different for each cue. The range is 0.0 to 365.9 seconds.
1. Press [Menu].
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
3. Press [Up] / [Down] arrows until FLTM appears. Press [Enter].
4. Press [Up] / [Down] arrows to set value. Once the value is set press [Enter]
To store a cue:
1. Press [Menu].
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
3. Press [Up] / [Down] arrows until Stor appears. Press [Enter]. The number
4. Press [Enter] to store cue. (Number will increase by one for next cue to be
5. Repeat for remaining cues.
To delete a cue:
1. Press [Menu].
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
3. Press [Up] / [Down] arrows until Del appears. Press [Enter]. The last cue
4. Press [Enter] to delete cue. (There is no "undo" function.)
To play a cue:
1. Press [Menu].
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
3. Press [Up] / [Down] arrows until PCue appears. Press [Enter]. This allows
02.9 671.00 01 C
button. The display will return to FLTM.
displayed is the cue number to be stored.
stored.)
number stored will be displayed and only the last cue will be deleted.
the stored cues to be selected by using [Up] / [Down] arrows and then played
by pressing [Enter]. (If there are no stored cues, "C --" will be displayed. If
there is one or more cues, "C xx" will be displayed - where xx is the cue
number from 1 to 99. Only cues in one luminaire will play.)
17-Sept-01
M S : C
ENU YSTEM UES AND
4
S
EQUENCES
67