Floor Mounting The Luminaire; Connecting Data And Power - Vari Lite VL2402 User Manual

VARI LITE® - VL2402™ W

Floor Mounting the Luminaire

The luminaire enclosure is sufficient to stabilize the luminaire in a floor installation,
provided that the mounting surface is flat and sturdy.

Connecting Data and Power

A maximum of 32 luminaires may be connected in any one DMX data link.
Note: This maximum limit applies to the luminaire "daisy chain" only. Your system
or console may require fewer luminaires on a single data link path. Consult your
console documentation for more information.
To connect power and data:
1. Connect data cable from console to first luminaire in chain at DATA IN
2. If required, connect additional data cables from DATA THRU connectors to
3. At last luminaire in link, install terminator at DATA THRU connector.
4. Connect AC Input Cable connector to power input source.
5. Dress AC input and data cables and secure them so that they will not
20
L
ASH UMINAIRE
connector.
DATA IN connectors of remaining luminaires in link.
(Luminaire(s) and other devices on the same DMX chain may not function
properly without termination.)
Data Thru
Data In
from console
interfere with luminaire head and yoke movement.
U ' M
SER S ANUAL
Data Thru
17-Sept-01
Termination
02. 9671.0 001 C