Vari Lite VL2402 User Manual page 37

Installing in Truss:
1. Using two people, lift luminaire into mounting position.
2. Secure in place with truss hook. Ensure truss
3. Attach safety cable (as required) as follows:
4. Connect power and data cables according to
Safety Cable:
Recommended for hanging installations.
May be required by local codes.
(43.8cm)
**
25.375"
(64.5cm)
*
27.125"
(68.9cm)
02.9 671.00 01 C
hook hardware that locks hook in place (e.g. wing
bolt) is properly tightened and that luminaire is
fully supported.
a. Connect one end of cable to luminaire handle.
b. Loop at least once around truss/pipe and
attach other end of cable to other handle.
procedure given in "Connecting Data and Power" on page
17.25"
*
From lens to top of bracket
**
From lens to base of enclosure
17-Sept-01
I : I
NSTALLATION NSTALLATION
19"
(48.3cm)
Handles are
approved for
safety cable
anchor points
***
18.5"
(47cm)
2
P
ROCEDURES
Safety Cable
Loop at least once.
20.
***
Head Swing
Diameter
19