Function Definitions - Vari Lite VL2402 User Manual

VARI LITE® - VL2402™ W

Function Definitions

Each menu item is listed in the first column by its display abbreviation. The
abbreviations appear in alphabetical order.
Display Definition
⇓⇓
Display Orientation
⇑⇑
Display Orientation
8 Standard 8-bit
16 Standard 16-bit
10M 10 Minutes
30s 30 Seconds
5M 5 Minutes
Addr Address
ALL All Motors
Ambr Amber
Auto Auto Detect or
Auto Playback
Blue Blue
BTim Beam Time
C ON On after Calibration Configures arc luminaire so that lamp will strike after calibration procedure is
Cal Re calibrate
CFG System
Configuration
CWhl Color Wheel
CMiX Color Mixer
CTim Color Time
Cue Cue Processing
cXX Cue Data
cXXX DMX Channel
DATA DMX Data
DDir Display Orientation
Del Delete Cue
DIFF Diffusion
Dimm Dimmer
Dis Disable
DisP Display Illumination
DISP Display Test
62
L U '
ASH UMINAIRE SER S
Table 4-3: Menu Function Definitions
Shows upside-down orientation (for hanging luminaires)
Shows upright orientation.
Configures luminaire for operation in standard DMX 8-bit mode.
Configures luminaire for operation in standard DMX 16-bit mode.
Sets Menu Display to automatically shut off after 10 minutes of non-use.
Sets Menu Display to automatically shut off after 30 seconds of non-use.
Sets Menu Display to automatically shut off after 5 minutes of non-use.
Accesses functions for setting luminaire starting address in either Virtuoso
(VIRT) or DMX (DMX) controlled systems.
Tests all internal motors.
Specifies Amber for manual control (Man) or test Amber functions (Test).
Automatically detects required Menu Display orientation when selected (DDir) or
initiates automatic playback of a cue sequence at power-up (CUE).
Specifies Blue for manual control (Man) or tests Blue functions (Test).
Accepts timing value for beam time.
complete.
Re calibrates luminaire.
Accesses functions for setting lamp start up, pan/tilt, and Menu Display
configurations. Also accesses lamp information such as number of strikes, and
hours used, along with their respective reset function.
Specifies Color Wheel for manual control and test.
Tests color mixing mechanism.
Sets color time. This applies to Blue, Amber, Magenta and Color Wheel.
Accesses cue store, modify, delete, and playback commands.
Specifies cue number for display of current data value.
Specifies DMX channel for display of current data value.
Accesses function for displaying DMX data by channel number.
Accesses option to orient Menu display for reading correctly in either hanging or
floor mounting installations.
Deletes cues by number. Cue number deleted is dependent on last cue ID in cue
list since this field is not editable.
Specifies manual control of Diffusion (Man) or tests Diffusion functions (Test).
Specifies dimmer mechanism for manual control (Man) or tests dimmer/strobe
functions (Test).
Disables a function.
Accesses options for Menu Display on and off times.
Tests all 14 segments in the Display.
17-Sept-01
M
ANUAL
Purpose
02. 9671.0 001 C