Hanging The Luminaire - Vari Lite VL2402 User Manual

Hanging the Luminaire

The luminaire can be hung horizontally or vertically from any structure designed to
work with the type of load created by this moving luminaire. Two truss hook bracket
assemblies (provided) are used to attach truss hooks or other mounting hardware as
required. Many compatible truss hooks are available from different manufacturers for
your particular needs.
A minimum of one hook per truss hook bracket is required. If mounting method does
not use truss hooks, two attachment points per truss hook bracket are required. When
attaching more than one point on a single bracket, the attach points must be spaced as
far apart as possible using the supplied mounting holes.
A safety cable is recommended for all hanging installations and may be required by
local codes.
Install mounting hardware and brackets:
1. Install truss hooks on two provided truss hook brackets as required.
Bracket
Truss Hook Hardware
(not provided)
Note: Various types of truss hooks can be used. The Mega Claw truss hook (as shown
in the example above) as well as many other standard hooks, can be ordered seperately.
2. Determine required configuration of bracket installation. Brackets may be
02.9 671.00 01 C
installed in either orientation as shown.
17-Sept-01
I : I
NSTALLATION NSTALLATION
Mega Claw
Truss Hook
(Not Provided)
Example Truss
Hook Installation
2
P
ROCEDURES
17