Menu Function Definitions - Vari Lite VL1000 User Manual

Menu Function Definitions

For easy reference, each possible menu item is listed alphabetically in the first column
by its display abbreviation. The second column follows with a definition of the
abbreviation and then a third column provides an explanation of its purpose and
function.
Display Definition
10 Min 10 Minutes
30 Sec 30 Seconds
5 Min 5 Minutes
Address DMX Address
ALL All Motors
Amber Amber
Arc Arc
Blue Blue
Cal ON Calibration On
Chan XXX DMX Channel
Clear Clear
ColorMix Color Mixer
Config System
Configuration
Data DMX Data
Diffusn Diffusion
Dimmer Dimmer
Disable Disable
Display Display Illumina-
tion
DMX DMX
Edge Edge Function
Enable Enable
Encoder Encoders
FAIL Test Fail
Fixt Hrs Fixture Hours
02.9 663.00 01 B
Table 4-3: Menu Function Definitions
Purpose
Sets Menu Display to automatically shut off after 10 minutes of non-use.
Sets Menu Display to automatically shut off after 30 seconds of non-use.
Sets Menu Display to automatically shut off after 5 minutes of non-use.
Accesses function for setting luminaire DMX starting address.
Tests all internal motors.
Specifies Amber for manual control (Manual) or test Amber functions
(Test).
Specifies luminaire as having an arc lamp source.
Specifies Blue for manual control (Manual) or tests Blue functions
(Test).
Configures arc luminaire so that lamp will strike after calibration procedure is
complete.
Specifies DMX channel for display of current data value.
Clears stored parameters and re-calibrates luminaire.
Tests color mixing mechanism.
Accesses functions for setting lamp, pan/tilt, and Menu Display options.
Also accesses lamp information such as number of strikes, and hours
used, along with their respective reset function.
Accesses function for displaying DMX data by channel number.
Specifies manual control of Diffusion (Manual) or tests Diffusion func-
tions (Test).
Specifies dimmer mechanism for manual control (Manual) or tests dim-
mer/strobe functions (Test).
Disables a function.
Accesses options for Menu Display on and off times.
Sets starting address for DMX systems.
Specifies edge function for manual control (Manual) or for testing (Test).
Enables a function.
Accesses encoder choices for diagnostic testing.
Indicates that sensor test has failed.
Displays total number of hours luminaire has been powered on.
11-Jun-02
M S : M
ENU YSTEM ENU
4
F
UNCTIONS
59