Engine Controller Board; Preparation For Removing The Engine Controller Pcb - Canon 3370 Series Service Manual

Chapter 3
3.1.8.3 Detaching the control panel
LBP3370
1) Remove the parts below.
- 1 screw [1]
- 1 clamp [2]
- 1 connector [3]
[2]
2) Detach the upper cover unit [1] together with the control panel.
- 2 screws [2] (to be loosened)
- 2 screws [3]
[2]
3) Free the harness [2] from the guide [1].
3-8
[1]
[2]
F-3-30
[3] [1]
F-3-31
[2]
[1]
[3]
F-3-32
[1]
4) Detach the control panel [1].
- 1 claw [2]
0018-2643
5) Detach the control panel [1].
- 1 connector [2]

3.1.9 Engine controller board

3.1.9.1 Preparation for removing the engine controller
PCB
LBP3370 / LBP3310
1) Detach the left cover.(page 3-2)Reference [Detaching the left cover]
2) Detach the right cover.(page 3-1)Reference [Detaching the right cover]
3) Remove the rear cover unit.(page 3-1)Reference [Removing the rear
cover unit]
4) Detach the upper cover unit.(page 3-3)Reference LBP3310 [Detaching
the upper cover](page 3-4)Reference LBP3370 [Detaching the upper
cover]
5) Remove the duplexing drive assembly.(page 3-6)Reference [Removing
[2] [1]
F-3-33
F-3-34
[1]
F-3-35
[1]
[2]
[2]
0018-3005