Boot Menu - Panasonic CF-73 Series Reference Manual

Setup Utility

Boot Menu

*3
When [Execute-Disable Bit Capability] is set to [Enable], it means that this computer supports
hardware-based Data Execution Prevention (DEP). It should usually be set to [Enable].
DEP is a set of hardware and software technologies that perform additional checks on memory to
help prevent malicious code from running on a system.
*4
When [Setup Utility Prompt] is set to [Disable], the message "Press F2 for Setup / F12 for LAN" is
not displayed on [Panasonic] boot screen. Even if the message is not displayed,
work.
*5
Setting impossible when the Supervisor Password is not set.
Boot priority order:
*1
1: USB FDD :
2: IDE HDD: xxxxxxxxxx
3: IDE MP: xxxxxxxxxx
4: PCI LAN: xxxxxxxxxx
5:
6:
7:
8:
Excluded from boot order:
: USB KEY:
: USB HDD:
: USB CDD:
: USB LS120:
*1
The following drive can be used for startup (recommended).
Panasonic USB floppy disk drive (optional. CF-VFDU03)
Boot priority order
Only the devices under [Boot priority order] can be booted.
The default order is as follows:
[USB FDD] -> [IDE HDD] -> [IDE MP] -> [PCI LAN]
To move a device up by one in the order, select the device with
F6.
To move a device down by one in the order, select the device with
press F5.
121
F2 F12
and will
and , and then press
and , and then