Boot Menu - Panasonic CF-Y2 Series Reference Manual

Setup Utility

Boot Menu

*1
Floppy Drive
Hard Disk Drive
CD/DVD Drive
*2
LAN
*1
The following drive can be used for startup (recommended).
Panasonic USB floppy disk drive : CF-VFDU03 (optional)
*2
This is not displayed when [LAN] or [Boot up from LAN] is set to [Disable] on [Advanced] menu.
The default order is as follows:
[Floppy Drive] -> [Hard Disk Drive] -> [CD/DVD Drive] -> [LAN].
To move a device up by one in the order, select the device with
To move a device down by one in the order, select the device with
F5.
NOTE
[Boot] menu cannot be changed when the Setup Utility is started up with the User
Password.
Boot Menu
The device for starting up the operating system can also be selected during computer
start-up. After the computer is turned on, and Esc is pressed at [Panasonic] boot
screen, [Boot Menu] (the device selection screen) will appear. When the setting of
[Boot] menu is changed, the selection screen display will also change. [Boot Menu] is
displayed only when [Boot First Menu] in [Security] menu is set to [Enable].
<Only for CF-Y2 series>
When [CD/DVD Drive Power] is set to [Off] in [Main] menu, startup cannot be
executed from DVD-ROM & CD-R/RW drive (item name CD/DVD drive). (
100)
104
, and then press F6.
and
and , and then press
page