Removing A Pc Card - Panasonic Toghbook CF-48 Series Reference Manual

PC Cards
Eject Button

Removing a PC Card

CAUTION
Do not remove a PC Card while your computer is in the standby or hiberna-
tion mode.
When two PC Cards are inserted, perform the following procedure (from
1 3
Step to Step for each of the two cards.
Note that the operation of removing the PC Card may not be complete,
depending on the status of the PC Card or device connected to the PC
Card, such as when a SCSI card is used to connect an external hard disk to
the computer. In such cases, turn off the power from [Start]* menu, then
remove the card.
*
Windows XP : [start]
1
Disable the card function
Windows 2000
1
Select on the taskbar, select the PC Card, then select [Stop].
2
Follow the on-screen instructions.
(When the PC Card has been removed after the computer is turned off, this
step is not necessary.)
Windows XP
1
Select on the taskbar, select the PC Card, then select [Stop].
2
Follow the on-screen instructions.
(When the PC Card has been removed after the computer is turned off, this
step is not necessary.)
2
Press the button out, then press the button again
3
Slide the PC Card out
31