Troubleshooting
8
Close the finisher front door.
9
Pull out the tray currently used, then reload paper.
10
Close the tray.
!
Detail
For details of the locations of paper misfeeds, refer to "Paper misfeed indications" on
Reminder
When removing misfed paper, be careful that the paper does not tear and remain in the machine.
7 CAUTION
Precaution for high temperature
Parts around the rail for stapler of Finisher FS-522 are extremely hot.
%
In order to reduce the risk of burns, do not touch any part in this unit when clearing paper misfeeds.
4.2.14
Clearing a paper misfeed in Finisher FS-523
1
Open the finisher upper door FN1.
2
Open lever FN2, and then remove any paper.
501/421/361
4
page
4-5.
4-26