Troubleshooting
Clearing a paper misfeed in Finisher FS-517/FS-518
This procedure describes the operations to be performed along the paper
path where paper misfeeds may occur.
Depending on the selected Finishing settings, the paper path changes, re-
sulting in different locations in the finisher where paper misfeeds may occur.
The method for clearing paper misfeeds in Finisher FS-517 is the same as
that for FS-518. Here, the method for FS-517 is described as an example.
1
Open the cover for the
horizontal transport unit,
and then remove any
misfed paper in the hori-
zontal transport unit.
–
Do not forcefully
push or pull the sen-
sor pin in the hori-
zontal transport unit,
otherwise the hori-
zontal transport unit
may be damaged.
C550
Sensor pin
4
4-55